Page 108 - Florida-Strut-Catalog-2021-04-22-2021
P. 108

     A ZSi-Foster Company
W7350 to W7352
Concrete Insert
Continuous Concrete Inserts FS12138NS - 15⁄8" x 13⁄8" - 12 Gauge
  New Item W7350
W7351
W7352
23⁄4"
12" (305mm)
16" (406mm)
20" (508mm)
24" (610mm)
32" (813mm)
36" (914mm)
40" (1016mm)
4' (1.2m)
5' (1.5m)
6' (1.8m)
7' (2.1m)
8' (2.4m)
9' (2.7m)
10' (3m)
12'(3.6m)
14' (4.2m)
16' (4.8m)
18' (5.4m)
20' (6.1m)
220# (99.7 Kg)
250# (113.3 Kg) 310# (140.6 Kg) 370# (167.8 Kg) 490# (222.2 Kg) 550# (249.4 Kg) 610# (276.6 Kg) 730# (331.1 Kg) 910# (412.7 Kg) 1,090# (494.4 Kg) 1,270# (576 Kg) 1,450# (657.7 Kg) 1,630# (739.3 Kg) 1,810# (821 Kg) 2,170# (984.2 Kg) 2,530# (1147.5 Kg) 2,890# (1310.8 Kg) 3,250# (1474.1 Kg) 3,610# (1637.4 Kg)
41mm
W5953
W5953
     Part No.
  Size
  Anchor End Caps
  Wt. / CPCS
  Allowable Load Lbs. (kN)
  70mm
 4" (102mm)
6" (152mm)
8" (203mm)
W5953
100# (45.3 Kg)
130# (58.9 Kg)
160# (72.5 Kg)
800 (3.56 kN)
1000 (4.45 kN)
1200 (5.34 kN)
Size
     Refer to page 96 for continuous concrete insert part number selection chart to build complete part number based on desired options .
W7353 to W7370
12 Gauge, Continuous Concrete Inserts
When ordering specify finish. Available in plain, pre-galvanized, hot dip galvanized after fabrication, 304 and 316 stainless steel .
New Item
W7353 *
W7354
W7355
W7356
W7357
W7357A
W7358
W7359
W7360
W7361
W7362
W7363
W7364
W7365
W7366
W7367
W7368
W7369
W7370
4"
   102mm
  4"
102mm
  Waterproof Sealer Tape and Rigid Foam Filler shown exposed in place
FS12138NS
4"
W5933 End Cap
3⁄4"
19mm
1 5⁄8"
41mm
102mm
2"
  Rigid Foam Filler
51mm
 1 3⁄8"
35mm
 Part No.
  Size
  End Cap
  Wt. / CPCS
  Allowable Load Lbs. (kN)
  1 5⁄8"
               2000
(8.90 kN)
35mm
1 3⁄8"
35mm
1 3⁄8"
   W5933
                   * W7353 utilizes tab channel (punched & anchor caps)
Concentrated load on the end 2" (51mm)
of W7352 thru W7370 should not exceed 1,000# . Inserts must be surrounded by sufficient concrete to conform to design shear stress . Concrete insert should be nailed to form every 16" to 24" (406mm to 635mm)
www.floridastrut.com
 Refer to page 105 for continuous concrete insert part number selection chart to build complete part number based on desired options .
– 108 –
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
 
   106   107   108   109   110