Page 44 - Florida-Strut-Catalog-2021-04-22-2021
P. 44

     A ZSi-Foster Company
BC10
All Purpose Beam Clamp
Beam Clamps
Standard Finish: Electro Galvanized (EG)
BC11
Beam Clamp Formed Steel with J – Hook
 Wesanco: W5750
  W
2"
   300# Locknut in First Hole
51mm
 2 Holes 9⁄16" Dia.
Provides for hanging rod directly below set screw .
A 20° swivel is possible using 1⁄4" or 3⁄8" rod .
Alternate use provides 1⁄4", 3⁄8" or 1⁄2" rod to be extended from the top to the bottom of the clamp on the end opposite the set screw . A 1⁄4" flat washer must be used with 1⁄4" rod .
3"
 Position
  Design Load
  Part No.
 W
  Florida Strut
   A 500 Lbs. (2.22 kN)
B 300 Lbs. (1.33 kN)
BC12
Swivel Nut for use with BC10, BC11 and BC14
BC110600
BC110900
BC111200
BC14
Ø 17⁄32" 13mm 3 PLACES
3" thru 6" (76 to 152mm)
6" thru 9" (152 to 228mm)
9" thru 12" (228 to 305mm)
500# Locknut in Second Hole
  76mm
      Beam Clamp Swivel Adapter for BC10
For use with 1⁄4", 3⁄8" or 1⁄2" rod (6mm, 8mm or 10mm) . If swivel is required use BC12 Swivel Nut .
Wesanco: W5751
             RS 15 .0°
1⁄4"-20
3⁄8"-16
1⁄2"-13
Includes 3⁄8" x 13⁄4" bolt and nut
BC10
BC14
For Hanging 1/4" or 3/8" Rod at a 20° swivel
Design load 500 lbs
2.22 kN
www.floridastrut.com
     Part No.
 Rod Size
  Florida Strut
  BC120025
BC120037
BC120050
– 44 –
    It is recommended that the beam be dimpled at set screw contact location(s)
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
 







































   42   43   44   45   46